My Quote

Submit Quote


My Ideas

Send us your ideas to discuss further Submit Ideas

Call Me

Have us call you back

Prefinished Cedar Lining Boards - Prefinishstyle Endmatched 86mm

Prefinished Cedar Lining Boards - Prefinishstyle Endmatched 86mm (P1167)
Prefinished Cedar Lining Boards - Prefinishstyle Endmatched 86mm (P1167)

Prefinishstyle endmatched lining is precision machined from sustainably managed regrowth and prefinished in clear satin lacquer. This produces unmatched natural warmth and beauty with minimal maintenance. 

Prefinishstyle features rich colour variation, highlighting the stunning natural colour range of Western Red Cedar (no stains or dyes).

The lining is milled from genuine timber and factory prefinished to save time and hassle onsite. Installed to timber battens with adhesive and stainless brads, our lining has a V-joint secret-nail profile and is endmatched for minimal wastage and much faster installation. 

This product is available in two widths: 86 x 10mm (P1167) and 137mm x 10mm (P1186)

Our prefinished cedar lining is ideal for all applications that are not exposed to direct weather or UV reflection, such as alfresco and patio ceilings and balconies. Both sides of the timber board are prefinished with satin-finished polyurethane and UV cured for long-term durability.

Prefinished lining is supplied wrapped in plastic for protection during transport. Your project can be finished off with a range of matching prefinished trims available from Cedar West.

  86 x 10mm Cover.

  Milled from genuine Western Red Cedar and available in 300mm increments up to a maximum length of 6000mm.

  Popular V-joint profile.

  Endmatched for less wastage and faster installation.

  Prefinished for no mess and no extra costs.

  Both sides are prefinished with clear satin-finished, UV cured polyurethane.

  Rich variation & warmth of real timber (not stained imitation wood).

  Kiln-dried for optimum stability.

  Secret-fix to battens with adhesive and 25mm stainless steel brads at maximum 450mm centres.

  May be used internally or externally.

   Not suitable for areas exposed to direct weather such as sun, rain or salt. Also not suitable for areas with high UV reflection, such as applications near swimming pools, ponds or within 1km of coast.

  Wrapped in plastic for protection during transport and handling.

  Matching prefinished corner beads and trim products.

  Large stock in WA

(click to image enlarge)


All denoted areas are to be pre-finished timber lining supplied by Cedar West and installed by a qualified installer as per the below specification and in accordance with good commercial practice and any relevant codes or standards;



The profile shall be P1167 measuring 86 x 10 and the species shall be cedar, as per sample supplied by Cedar West.

The product shall be milled from the genuine species (not stained imitation wood) which is premium tight grain timber and seasoned for optimum stability.

The product shall be precision machined to furniture grade tolerances prior to prefinishing.

The product shall be endmatched for less wastage and faster, neater installation.

The trim products shall be (insert product) measuring (insert dimensions) and the species and timber specifications shall be the same as above.



The product shall be prefinished on both sides with UV cured coating which is Australian made and factory applied to the manufacturers specifications.

The coating shall be a polyurethane lacquer (not an oil based penetrating finish) to seal the timber and help maintain consistent moisture content  and dimensional stability.

The coating shall consist of a sealer coat (on both sides) and a final top-coat on the front face which has a satin gloss level for a beautiful even sheen without excessive reflectivity.



All timber products should be climatised as required onsite to ensure moisture and temperature equilibrium with the surrounding environment prior to installation.

The sub-frame shall be level and aligned and consist of Straightline battens supplied by Cedar West and installed with countersunk screws at maximum 450mm centres.

The product shall be installed perpendicular to the sub-frame using suitable adhesive and 25x1.2mm stainless steel brads which are secret-nailed at 450mm centres.

The product shall be protected as required to ensure it is not exposed to direct weather such as sun, rain or salt spray. (If in doubt use raw finish coated with a suitable exterior coating product)

The product shall be cleaned and maintained as required to avoid any accumulation of surface contaminants and to maintain the desired performance and appearance.

Make Your First Impression Last