Prefinished Cedar Lining Boards - Satinstyle 86mm

Prefinished Cedar Lining Boards - Satinstyle 86mm (L2315)
Prefinished Cedar Lining Boards - Satinstyle 86mm (L2315)

Satinstyle prefinished cedar lining is tinted to create a richer appearance and more uniform colour. The lining is factory prefinished in satin lacquer for a beautiful lustre that brings out the natural warmth of the timber.

Satinstyle's unique tinting process provides a more consistent and refined colour range, but still allows the warm characteristics of the timber to shine. Colour variations remain visible, which creates a beautiful, natural look.

The lining is milled from genuine solid cedar and factory prefinished with a UV-cured, satin-finished polyurethane for convenience and durability. Satinstyle has a V-joint profile and can be secret-fixed to timber battens with adhesive and stainless brads. 

This product is 86mm x 9mm. 

Our prefinished cedar lining is ideal for use on alfresco and patio ceilings, balconies, interior walls and any other applications that are not exposed to direct weather or reflective UV rays.

Prefinished lining is supplied wrapped in plastic for protection during transport. Your project can be finished off with a range of matching prefinished trims available from Cedar West.

  86 x 9mm cover.
  Milled from genuine Western Red Cedar and available in 300mm increments up to a maximum length of 6000mm.
  Popular V-joint profile.
   Unique tinted finish for enhanced richness and a more uniform colour. Please note that natural colour variation will still be visible.
  Prefinished for no mess and no extra costs.
  Both sides are prefinished with clear satin-finished, UV cured polyurethane.
  This product is square-end docked.
  Rich variation & warmth of real timber (not stained imitation wood).
  Kiln-dried for optimum stability.
  Secret-fix to battens with adhesive and 25mm stainless steel brads at maximum 450mm centres.
 End butt joints must be joined over a ceiling joist or have a glued backing block to hold secure. 
  May be used internally or externally.
   Not suitable for areas exposed to direct weather such as sun, rain or salt. Also not suitable for areas with high UV reflection, such as applications near swimming pools, ponds or within 1km of coast.
  Wrapped in plastic for protection during transport and handling.
  Matching prefinished corner beads and trim products.
  Large stock available.

(click to image enlarge)


All denoted areas are to be prefinished timber lining supplied by Cedar West and installed by a qualified installer as per the below specification and in accordance with good commercial practice and any relevant codes or standards; 


The profile shall be L2315 measuring 86 x 9 and the species shall be cedar, as per sample supplied by Cedar West.

The product shall be milled from the genuine species (not stained imitation wood) which is premium tight grain timber and seasoned for optimum stability.

The product shall be precision machined to furniture grade tolerances prior to prefinishing.

The trim products shall be (insert product) measuring (insert dimensions) and the species and timber specifications shall be the same as above. 


The product shall be prefinished on both sides with UV cured coating which is Australian made and factory applied to the manufacturers specifications.

The coating shall be a polyurethane lacquer (not an oil based penetrating finish) to seal the timber and help maintain consistent moisture content  and dimensional stability.

The coating shall consist of a sealer coat (on both sides) and a final top-coat on the front face which has a satin gloss level for a beautiful even sheen without excessive reflectivity. 


All timber products should be climatised as required onsite to ensure moisture and temperature equilibrium with the surrounding environment prior to installation.

The sub-frame shall be level and aligned and consist of Straightline battens supplied by Cedar West and installed with countersunk screws at maximum 450mm centres.

The product shall be installed perpendicular to the sub-frame using suitable adhesive and 25x1.2mm stainless steel brads which are secret-nailed at 450mm centres.

The product shall be protected as required to ensure it is not exposed to direct weather such as sun, rain or salt spray. (If in doubt use raw finish coated with a suitable exterior coating product)

The product shall be cleaned and maintained as required to avoid any accumulation of surface contaminants and to maintain the desired performance and appearance.

Make Your First Impression Last